受陆岸影响浅水区台风风浪的计算方案     

《热带海洋学报》1994,(1)

在我国港口工程技术规范的波浪成长理论基础上，考虑到台风波浪的基本特点、等效水深的概念、浅水区波浪的折射、不规则波的能量分布特性、受陆岸和岛屿影响角度范围内的有效能量风区长度等因素，提出了受陆岸、岛屿影响浅水区（包括海湾区）台风风浪的计算方案。本方案只需台风中心位置、中心气压和计算点于各方位的风区长度（受陆岸影响部分）等资料，便可快速地得到计算点的波浪要素。经实测资料验证，效果良好。  相似文献   

亚像素定位的关键问题研究   总被引：1，自引：0，他引：1  

王成亮  邹峥嵘  闾海庆  王静 《海洋测绘》2007,27(1):70-73

分析了控制点标志的选择与设计,采用了图像处理、Hough变换、角点与直线高精度定位算子等方法,实现了中南大学近景摄影测量二维控制场1 350个人工标志点的自动识别和亚像素定位,仿真图检测平均精度达到±0.05像素。  相似文献   

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin   总被引：1，自引：1，他引：1  

Michael Riedel 《Marine Geophysical Researches》2007,28(4):355-371

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.  相似文献   

Artificial Reefs in the Low Productive Marine Environments of the Southeastern Mediterranean   总被引：1，自引：0，他引：1  

E. Spanier    M. Tom    S. Pisanty  G. Almog-Shtayer   《Marine Ecology》1990,11(1):61-75

Abstract. Fishery yields in the oligotrophic waters of the Southeastern Mediterranean arc low due to habitat and food limitations. A four year study of a complex of artificial structures established in the coastal waters of Israel points to several possible solutions to these problems. One approach is the artificial enrichment of the man-made reef with trash fish. This, together with the configuration of the reef, caused a significant increase in the abundance of fish predators such as groupers of the genus Epinephclus. Omnivores and herbivores were attracted only by the presence of artificial structures. Some species, such as the slipper lobster Scyllurides lulus, only use the man-made reef for shelter during part of the day or season; they forage over a much larger area the rest of the time and are important "importers" of food to the artificial habitat. Artificial kelp were effective in recruiting juveniles and small fishes to the site.  相似文献   

用于极地的中尺度大气模式Polar MM5的改进和检验   总被引：1，自引：0，他引：1  

马艳  陈尚  张庆华 《海洋科学进展》2007,25(1):9-14

介绍了一个用于极地研究的中尺度大气模式———Polar MM5,阐述了该模式区别于标准的中尺度大气模式MM5的动力学和物理特征。利用Polar MM5获得了10 d的模拟结果表明,Polar MM5能较好地模拟高纬度地区近地面气象变量特征,尤其是对近地面温度和水汽混合比可得到高精度模拟结果,证实了在高纬度地区对标准MM5所进行的物理参数化方案的改进是切实有效的。  相似文献   

3D gravity modelling for Anyongbok Seamount in the East Sea     

Moo Hee Kang  Hyun-Chul Han  Hyesu Yun  Gee Soo Kong  Kyong O. Kim  Youn Soo Lee 《Marine Geophysical Researches》2007,28(3):257-269

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.  相似文献   

The contribution of nano- and micro-planktonic assemblages in the surface layer (0-30 m) under different hydrographic conditions in the upwelling area off Concepción, central Chile     

V. Anabalón  R. Escribano  M. Angélica Varas 《Progress in Oceanography》2007,75(3):396-414

In the highly productive region off central Chile, the structure and temporal and spatial variability of planktonic assemblages, and the factors that determine changes in this structure are poorly understood. In the region, wind-driven upwelling, heating by solar radiation and freshwater inputs are highly seasonal processes, which, together with higher frequency events, can promote changes in the planktonic communities, especially in the upper layer. This study focuses on the structure of nano- through to micro-planktonic assemblages (2-200 μm) of unicellular organisms (protists) in surface waters (0-30 m) during different hydrographic conditions. Samples were taken from a fixed shelf station off Concepción (COPAS time series Station 18) on eight occasions between September 2003 and August 2004. The nano-plankton flagellate-dominated fraction was numerically important during the whole period. Maxima in flagellate abundance and biomass occurred during the upwelling period (November-April samplings) but these maxima appear to be unrelated to the degree of water column stratification. The micro-plankton diatom-dominated fraction was usually the largest component in terms of biomass during the study period and the diatoms made important numerical contributions during the upwelling period, with maxima in abundance and biomass when water column stability was lowest. The dominant genera and morphotypes in each functional group were found throughout the study period, with maxima in abundance and biomass co-occurring under similar environmental upwelling conditions. The mean macro-nutrient concentrations (nitrate and silicate) were relatively high in the top 30 m during both upwelling and non-upwelling periods, and did not explain the maxima in plankton or functional group replacements. The persistence of the dominant taxa in the planktonic assemblages suggests a high degree of flexibility, though probably not at the specific level, to withstand the highly variable environmental conditions in this upwelling area.  相似文献   

Modelling morphological processes in the vicinity of shore-parallel breakwaters     

Julio A. Zyserman  Hakeem K. Johnson 《Coastal Engineering》2002,45(3-4)

  相似文献   

基于多源数据的三维城市建模方法     

叶秋果  滕惠忠  郭思海  李军  辛宪会 《海洋测绘》2006,26(6):62-64

以天津新港三维城市建模为例,介绍了基于二维数据、DEM和3D模型等多源数据的三维城市建模的方法和关键技术。为有效利用现有数据资源快速、准确建立三维城市模型提供了一种经济、灵活、省时、高效的方法。  相似文献   

Design of a 3D Chirp Sub-bottom Imaging System     

Jonathan M. Bull  Martin Gutowski  Justin K. Dix  Timothy J. Henstock  Peter Hogarth  Timothy G. Leighton  Paul R. White 《Marine Geophysical Researches》2005,26(2-4):157-169

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.  相似文献